Structural,morphological, dielectric and magnetic properties of Zn-Zr co-doping yttrium iron garnet

In this study, yttrium iron garnet co-doped with Zn and Zr atoms with a chemical formula Y₃Zn_xZr_xFe_(5−2x)O₁₂ (x = 0.0-0.3) has been successfully prepared by the solid-state reaction method. The effects of doping concentration on the microstructure, crystal structure, magnetic properties, and dielectric properties of Y₃Zn_xZr_xFe_(5−2x)O₁₂ were investigated. The microstructure analysis indicates that co-doping of YIG with Zn and Zr can effectively reduce the grain size of the ceramic. The crystal structure results reveal that the doping concentration of Zn–Zr has substantial influence on the lattice parameters of YIG, such as, increases the lattice constant, crystal cell size, and interplanar spacing. However, the second phase of ZrO₂ appears once x ≥ 0.15. Additionally, the dielectric properties of YIG ferrite can be regulated using this Zn–Zr co-doping method. Zn–Zr co-doping can improve the dielectric stability and reduce the dielectric loss at high temperature. The magnetization measurement shows that the saturation magnetization is stabilized at x < 0.15, and the magnetic loss is decreased with the increase in the doping concentration. Overall, the findings show that the ceramic with x = 0.1 exhibits better properties included high saturation magnetization (24.607 emu/g), low magnetic loss (0.0025 @ 1 MHz), and relatively low dielectric loss (496 @ 400°C).     

国外某高磷鲕状赤铁矿直接还原—磁选降磷研究

以国外某高磷鲕状赤铁矿为研究对象进行脱磷研究，该高磷矿铁品位为55.81%，磷含量为0.72%，铁矿物主要为磁铁矿和赤铁矿，48.61%的磷存在于磷酸盐中，47.22%的磷分布于铁矿物中。研究了脱磷剂用量、秸秆炭用量、还原温度以及还原时间对粉末还原铁指标的影响。结果表明：无脱磷剂碳酸钙时，无法获得合格的指标；在碳酸钙用量为25%，秸秆炭用量为12.5%，还原温度1 200 ℃，还原时间为75 min，还原产品两段磨矿两段磁选的条件下，可获得铁品位、铁回收率以及磷含量分别为94.27%、87.34%以及0.077%的粉末还原铁，该产品可作为电炉炼钢的优质原料。不加添加剂时，部分含磷矿物被还原成单质磷进入到金属铁中，故粉末还原铁磷含量较高，当碳酸钙用量为25%时，含磷矿物的还原受到抑制而保留在脉石相中，可实现降磷目的，而还原时间过长时，磷仍在脉石相中，铁颗粒将部分含磷矿物包裹，磨矿难以分离，导致磷含量升高。     

Effect of ultrasonic vibration on thermal and material flow behavior,microstructure and mechanical properties of friction stir welded Al/Cu joints

Al/Cu dissimilar joint has been widely produced by using friction stir welding (FSW), but the weld quality remains limited. A recently developed ultrasonic     

Personality expression and recognition in Chinese language usage

User Modeling and User-Adapted Interaction - Personality plays a pivotal role at work. Many scholars have investigated the association between personality and language usage habits in the English...     

Unsteady free convection of second‐grade nanofluid with a new time‐space fractional heat conduction

The Caputo and Caputo–Fabrizio derivative are applied to study a second‐grade nanofluid over a vertical plate. A comparative analysis is presented to study the unsteady free convection of a second‐grade nanofluid with a new time–space fractional heat conduction. The governing equations with mixed time–space fractional derivatives are non‐dimensionalized and solved numerically, and a comparison between the Caputo and the Caputo–Fabrizio models is made. It is found that the temperature is higher for the Caputo–Fabrizio fractional model than the Caputo model, but the higher velocity only exists near the vertical plate for the Caputo–Fabrizio model than the Caputo model. Moreover, the velocity for the Caputo model will exceed the Caputo–Fabrizio model as y evolves.